FLYTO 4.9 / 5.8 / 6GHz Dual-Receiver VRX – FatShark / Skyzone Compatible
FLYTO — A dual-receiver ground module covering 4.9, 5.8 and 6 GHz, built to drop into FatShark or Skyzone goggles so two antennas work as one link.
Specifications
| Model | FLYTO |
| Type | VRX |
| Frequency band | 4.9 / 5.8 / 6 GHz |
| Connector / input voltage | See the variant you select — this listing covers more than one version |
Before you buy
- Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
- Never power a VTX without an antenna connected — the reflected power damages the output stage.
- Check local RF regulations; high output power is not legal for general use in most countries.
In the box
- 1 × FLYTO dual-receiver VRX module
- 1 × goggle-bay harness where the variant includes it
Why this spec
- Dual receivers with diversity pick the stronger of two antennas per frame — that is the difference between a usable and an unusable link at range.
- 4.9 / 5.8 / 6 GHz covers low-band and the 6 GHz edge, so one module follows your VTX across the whole analog 5 GHz range.
- FatShark / Skyzone goggle bay compatibility means no soldering into the goggles.
- Dual antennas must match the band — a 5.8 GHz antenna on the 4.9 GHz channel costs you most of the diversity gain.
What you still need to complete the build
- A matching antenna for the band, rated above your output power
- A clean power source sized for the module's current draw
- For VRX units: a display or goggle with analog video input
Support and returns
Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: Dual receiver. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.