RD 4.9 / 5.8 / 6GHz VTX – 3W, Camera & FC Integration
RD — 3 W across 4.9, 5.8 and 6 GHz — roughly double the usable range of a 750 mW unit in free space, which is the margin that keeps the link when you drop behind a ridge.
Specifications
| Model | RD |
| Type | VTX |
| Frequency band | 4.9 / 5.8 / 6 GHz |
| Output power | 3 W |
| Connector / input voltage | See the variant you select — this listing covers more than one version |
Before you buy
- Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
- Never power a VTX without an antenna connected — the reflected power damages the output stage.
- Check local RF regulations; high output power is not legal for general use in most countries.
In the box
- 1 × RD 3 W VTX
- 1 × power / video harness
- Antenna only on the '+Antenna' variant
Why this spec
- 3 W across 4.9–6 GHz covers the whole 5.8 GHz band plus the lower 4.9 GHz and upper 6 GHz edges, which is where interference is usually quieter.
- Camera and FC integration on the board removes a wiring harness from the build — video in, power, and control all land on the module.
- 3 W is a long-range figure: at 25 mW–600 mW most pilots never need it, and it is restricted in most countries without a licence.
- Check the variant — the antenna is a separate option, and this unit must never be powered without one.
What you still need to complete the build
- A matching antenna for the band, rated above your output power
- A clean power source sized for the module's current draw
- For VRX units: a display or goggle with analog video input
Support and returns
Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 4.9G/5.8G/6G 3W VTX Image transmission; 4.9G/5.8G/6G 3W VTX Image transmission+Antenna. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Will this camera work with my video system?
Match the camera’s video output format, supply voltage, connector pinout and supported receiver or transmitter system. Similar connectors do not establish analog or digital compatibility.
How do I check mounting fit?
Compare the exact camera dimensions, mounting points, lens clearance and cable exit with the frame and mount. Verify the selected version before ordering.
Are resolution and TVL directly interchangeable?
Do not treat a TVL rating as a digital pixel count. Evaluate the output format and the complete camera-to-display signal chain for the intended use.
Does the package include a VTX, receiver or control board?
Only equipment explicitly listed in the selected package should be treated as included. Confirm any zoom-control, OSD or adapter requirements separately.
What should I verify before applying power?
Check supply limits and polarity against the exact camera documentation and connected harness. Do not assume a flight controller pad provides the required voltage.