1.2GHz / 1.3GHz 2W FPV Link – VTX or VRX, Wireless Video
1.2G / 1.3G Link — 2 W on 1.2/1.3 GHz, available as either end of the link. This is the band long-range pilots fall back to when 5.8 GHz stops penetrating.
Specifications
| Model | 1.2G / 1.3G Link |
| Type | VTX or VRX |
| Frequency band | 1.2 GHz / 1.3 GHz |
| Output power | 2 W |
| Connector / input voltage | See the variant you select — this listing covers more than one version |
Before you buy
- Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
- Never power a VTX without an antenna connected — the reflected power damages the output stage.
- Check local RF regulations; high output power is not legal for general use in most countries.
In the box
- 1 × 1.2/1.3 GHz module (VTX or VRX, as selected)
- 1 × power / video harness
- Antenna not included
Why this spec
- One listing, either end of the link — the variant decides whether you get a 2 W transmitter or the matching receiver, so order both if you need a pair.
- 2 W on 1.2/1.3 GHz is the classic long-range fallback: it penetrates foliage that stops 5.8 GHz dead.
- Analog CVBS keeps latency near zero — the reason analog is still used for long-range instead of digital HD.
- Check the variant carefully: VTX and VRX share the same shell and the same page, and they are not interchangeable.
What you still need to complete the build
- A matching antenna for the band, rated above your output power
- A clean power source sized for the module's current draw
- For VRX units: a display or goggle with analog video input
Support and returns
Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 1.2G VRX Receiving module. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.