MM238R Video Receiver Module – 4.9–6GHz / 5.8GHz Analog

MM238R Video Receiver Module – 4.9–6GHz / 5.8GHz Analog

MM238RW
$39.45
Sale price  $39.45 Regular price  $39.45
Skip to product information
MM238R Video Receiver Module – 4.9–6GHz / 5.8GHz Analog

MM238R Video Receiver Module – 4.9–6GHz / 5.8GHz Analog

$39.45
Sale price  $39.45 Regular price  $39.45
ColorMM238RW

MM238R — A bare receiver module for integrating analog video into your own ground station, monitor build or repeater.

Specifications

Model MM238R
Type Receiver module
Frequency band 4.9–6 GHz / 5.8 GHz
Connector / input voltage See the variant you select — this listing covers more than one version

Before you buy

  • Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
  • Never power a VTX without an antenna connected — the reflected power damages the output stage.
  • Check local RF regulations; high output power is not legal for general use in most countries.

In the box

  • 1 × MM238R receiver module
  • 1 × power / video harness where the variant includes it

Why this spec

  • A receiver module, not a finished unit — it is a chip-down board meant to be built into a ground station or goggles, so expect to solder.
  • 4.9–6 GHz coverage means one module handles 4.9 GHz low-band, 5.8 GHz, and the 6 GHz edge without swapping hardware.
  • Small footprint is the point: this fits inside a goggle shell where a full-size receiver will not.
  • Analog output — pair it with an analog display or a DVR, not a digital HD system.

What you still need to complete the build

  • A matching antenna for the band, rated above your output power
  • A clean power source sized for the module's current draw
  • For VRX units: a display or goggle with analog video input

Support and returns

Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: MM238RW. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I check video-link compatibility?

Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.

Does every option include both a transmitter and a receiver?

Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.

Will a higher power setting guarantee longer range?

No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.

What should I check before powering a transmitter?

Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.

Will it fit my goggles or flight controller?

Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.

You may also like