axisflying-firefly-mini-fpv-camera-1500tvl

Axisflying Firefly Mini FPV Camera – 1/3" CMOS 1500TVL, F1.8 Starlight, 5–28V, 14×14mm

Pink
$37.99
Sale price  $37.99 Regular price  $14.84
Skip to product information
axisflying-firefly-mini-fpv-camera-1500tvl

Axisflying Firefly Mini FPV Camera – 1/3" CMOS 1500TVL, F1.8 Starlight, 5–28V, 14×14mm

$37.99
Sale price  $37.99 Regular price  $14.84
Color

Firefly Mini is a 14×14 mm micro analog FPV camera built for low-light flying. A 1/3" CMOS sensor paired with an F1.8 lens delivers 1500TVL resolution and 0.01 Lux minimum illumination — usable footage at dusk and under street lighting.

The wide 5–28 V input means it runs directly from a 6S pack without a separate BEC, and Super WDR keeps both sky and ground readable when you punch out into bright light.

Specifications

Model Firefly Mini
Image sensor 1/3" CMOS
Horizontal resolution 1500 TVL
Pixel size 2.8 µm
Lens F1.8, 130° FOV
Minimum illumination 0.01 Lux
Aspect ratio 16:9
TV system PAL
Video output Analog CVBS
Input voltage 5–28 V DC
Current draw 40 mA @ 12 V
Shutter Auto
White balance Auto
Noise reduction 3D DNR
WDR Super WDR (HDR)
Day / Night Color
OSD menu Supported
Dimensions 14 × 14 mm
Operating temperature -20 °C to +70 °C
Storage temperature -40 °C to +80 °C

Before you buy

  • PAL video standard. Confirm your goggles or VRX supports PAL — most do, but some US-market goggles default to NTSC.
  • 16:9 output. If your goggles are 4:3 you will see black bars or a cropped frame.
  • 14 × 14 mm mounting. Check your frame's camera mount; a 19 mm adapter may be needed.
  • Analog only. This is a CVBS camera — it does not output HDMI or digital HD video.

In the box

  • 1 × Firefly Mini camera
  • 1 × cable harness

Why this spec

  • 14 × 14 mm mounting on a 19 mm body footprint — it fits micro and sub-250 g builds where a full 19 mm camera will not.
  • 5–28 V input means a 5 V pad or up to 6S direct; no BEC needed on most builds.
  • Super WDR holds shadow detail when you turn into a low sun, which is exactly where cheap cameras go black.
  • 40 mA at 12 V is about 0.5 W, so it does not load a small VTX regulator.
  • PAL 16:9 CVBS output matches the common analog VTX and goggle combinations with no settings to change.

What you still need to complete the build

  • A VTX with a compatible video standard
  • 5V or variable supply within the camera's range
  • A mount matching the camera width

Support and returns

Covered against manufacturing defects for 12 months. If the image is dead on arrival, has lines or colour loss, contact us with the order number and a screenshot from the goggles. Crash damage, reversing the supply and running it above 28 V are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: Pink; Black; White; Red; Blue. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

Will this camera work with my video system?

Match the camera’s video output format, supply voltage, connector pinout and supported receiver or transmitter system. Similar connectors do not establish analog or digital compatibility.

How do I check mounting fit?

Compare the exact camera dimensions, mounting points, lens clearance and cable exit with the frame and mount. Verify the selected version before ordering.

Are resolution and TVL directly interchangeable?

Do not treat a TVL rating as a digital pixel count. Evaluate the output format and the complete camera-to-display signal chain for the intended use.

Does the package include a VTX, receiver or control board?

Only equipment explicitly listed in the selected package should be treated as included. Confirm any zoom-control, OSD or adapter requirements separately.

What should I verify before applying power?

Check supply limits and polarity against the exact camera documentation and connected harness. Do not assume a flight controller pad provides the required voltage.

You may also like