BrotherHobby Avenger 2808 Brushless Motor for FPV Drones
The BrotherHobby Avenger 2808 is a responsive brushless motor designed for 6-inch to 8-inch long-range FPV quads, cinematic builds, and freestyle platforms. Featuring 7075 aluminum alloy construction, a hollow titanium alloy shaft, and Japanese NMB bearings, it balances agile throttle control with high cruising efficiency.
Specifications
| Configuration | 12N14P |
| Available KV Ratings | 1350KV / 1500KV / 1900KV |
| Rated Voltage | 4S - 6S LiPo |
| Stator Dimensions | 28mm x 8mm |
| Shaft & Prop Thread | Hollow titanium alloy shaft / M5 thread |
| Mounting Pattern | M3 (19mm x 19mm) |
| Recommended Propellers | 6-inch, 7-inch, and 8-inch props (e.g. HQ 7x3.5x3, HQ 8x4.5x3) |
Before you buy
- KV is a gear ratio, not a quality score. 1350KV is the 6S / 7-inch long-range choice, 1500KV suits 6S / 6-inch, 1900KV is for 4S / 5-inch. Picking a KV that is too high for the prop size overheats the motor at part throttle.
- Match the ESC current to four motors, not one. A 2808 pulling 35 A on a 7-inch prop means 140 A at the pack — size the 4-in-1 ESC for that total.
- Check the mounting pattern before you buy. These use the standard 16×16 mm and 19×19 mm M3 patterns; the frame arm must have matching slots.
- Prop nut and shaft are not interchangeable across sizes. Confirm 5 mm shaft and M5 nut if you plan to reuse existing props.
In the box
- 1x BrotherHobby Avenger 2808 Brushless Motor
- 4x M3 Mounting Screws
- 1x M5 Aluminum Flanged Lock Nut
Why this spec
- AL 7075 Aluminum Alloy: Precision CNC machined bell and base for durability and light weight.
- Titanium Alloy Hollow Shaft: High strength-to-weight ratio to resist deformation under high-G loads.
- Japanese NMB Bearings: Smooth throttle feel with low vibration profile.
- 0.2mm Kawasaki Silicon Steel Stator: High electromagnetic efficiency to manage operating temperatures.
- N52H Curved Magnets: Strong linear torque across the throttle range.
What you still need to complete the build
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Support and returns
Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 1350KV; 1500KV; 1900KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.