BrotherHobby Avenger 2816 Brushless Motor for FPV Drones
The BrotherHobby Avenger 2816 is a robust brushless motor designed for long-range FPV drones, cinematic platforms, and multi-rotor UAVs. Constructed with 7075 aluminum alloy components, a hollow titanium alloy shaft, and Japanese NMB bearings, it provides dependable power delivery and structural durability.
Specifications
| Configuration | 12N14P |
| Available KV Ratings | 620KV / 720KV / 750KV / 810KV / 1050KV |
| Rated Voltage | 4S - 6S LiPo |
| Stator Dimensions | 28mm x 16mm (Kawasaki 0.2mm silicon steel) |
| Motor Dimensions | Φ34mm x 46.2mm |
| Shaft & Prop Adapter Thread | Titanium alloy hollow shaft / M5 thread |
| Mounting Pattern | M3 (19mm x 19mm) |
| Bearings | Japanese NMB 12mm x 6mm x 4mm |
| Wire Specification | 18AWG silicone wire, 250mm length |
Before you buy
- 620KV–810KV is the 8S / 10-inch range, 1050KV is the 6S / 8-inch option. Going up in KV without going down in prop size is the fastest way to cook a motor.
- Stator size is the torque number. 2816 holds a 10-inch prop at low throttle without the current spike you get from a smaller stator on the same prop.
- Mounting is 19×19 mm M3 — check the arm slots; a 16×16 arm will not take these without an adapter plate.
- Plan the ESC for peak, not cruise. Four of these on 10-inch props can pull well over 120 A at the pack on punch-out.
In the box
- 1x BrotherHobby Avenger 2816 Brushless Motor
- 4x M3 Mounting Screws
- 1x M5 Aluminum Flanged Lock Nut
Why this spec
- 7075 Aluminum Construction: AL 7075 bell and base casing with hard-anodized finish for surface durability.
- Titanium Alloy Hollow Shaft: High torsional rigidity while minimizing central rotating mass.
- Japanese NMB Bearings: Premium 12mm x 6mm x 4mm NMB bearings for smooth rotation and reliable operating life.
- Kawasaki 0.2mm Stator Laminations: High-grade silicon steel stator core paired with N52H curved arc neodymium magnets.
- High-Grade Enamelled Windings: Quality insulated copper windings engineered for reliable thermal dissipation during extended flights.
What you still need to complete the build
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Support and returns
Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 620KV; 750KV; 810KV; 1050KV; 720KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.