BrotherHobby Avenger 4215 V5 Brushless Motor

BrotherHobby Avenger 4215 V5 Brushless Motor

390KV
$35.35
Sale price  $35.35 Regular price  $35.35
Skip to product information
BrotherHobby Avenger 4215 V5 Brushless Motor

BrotherHobby Avenger 4215 V5 Brushless Motor

$35.35
Sale price  $35.35 Regular price  $35.35
Size

The BrotherHobby Avenger 4215 V5 is a heavy-lift multirotor brushless motor designed for industrial, cinematic, and endurance drone platforms running 12- to 18-inch folding or direct-mount propellers. Built with an SUS420 heat-treated steel shaft, 7075 aluminum alloy bell and base, and N52H curved neodymium magnets.

Specifications

Stator Size 4215 (42mm diameter × 15mm height)
Bell & Base Material 7075 Aluminum Alloy
Shaft Material SUS420 Heat-Treated Alloy Steel
Magnets N52H Curved Neodymium
Windings Class TU1 Enamelled Copper
Motor Weight 213g (including wires)
Available KV Options 390KV, 435KV, 555KV

Before you buy

  • 4215 is a 9–10-inch long-range stator. 390KV is the 6S choice for a 10-inch cruiser, 435KV suits 6S on 9-inch, and 555KV is for 6S on 8-inch or 4–6S on lighter props.
  • 213 g per motor — four of these plus a 10-inch frame puts you in the 900 g+ dry-weight class. Do not plan this on a 5-inch power train.
  • M5 prop thread. Confirm your props are M5-bore; a 5 mm plain bore needs an adapter, not force.
  • 7075 bell and SUS420 shaft handle the load, but a bent shaft from a prop strike is not a warranty item.
  • Current draw at 6S on 10-inch props is the number to size the ESC for — plan a 4-in-1 rated well above the per-motor figure.

In the box

  • 1 × BrotherHobby Avenger 4215 V5 Brushless Motor
  • 4 × Mounting Screws
  • 1 × Propeller Locking Nut

Note: Folding propeller adapters and blade sets shown in factory graphics are available as separate accessory configurations.

Why this spec

  • 7075 aluminum alloy bell and base with durable hard-anodized finish and vented cooling channels
  • SUS420 heat-treated alloy steel shaft for high shear and torsional load resistance
  • N52H curved neodymium magnets arranged for uniform, consistent air gap
  • Class TU1 high slot-fill enamelled copper windings for reduced internal resistance
  • Ultra-thin non-oriented silicon steel stator laminations for low eddy-current losses
  • High-precision heavy-duty bearings engineered for substantial axial loads
  • Total motor weight with lead wires: 213g

Factory bench tests conducted with folding 3-blade propellers under controlled laboratory conditions (26°C ambient, 100% throttle for 2 minutes). Values are for reference and will vary with flight conditions and ESC configuration.

KV Variant Tested Propeller ESC & Voltage Current (A) RPM Thrust (gf) Input Power (W) Efficiency (gf/W) Motor Temp (2 min)
390KV 1865 3-Blade Folding (GF Nylon) 8S 60A (33.6V) 54.2A 8,012 7,885 gf 1,821W 4.33 gf/W 96°C
435KV 15558 3-Blade Folding (GF Nylon) 8S 60A (33.6V) 54.2A 9,114 6,902 gf 1,821W 3.79 gf/W 75°C
555KV (8S) 1248 3-Blade Folding (GF Nylon) 8S 65A (33.6V) 61.9A 12,237 6,676 gf 2,079W 3.21 gf/W 57°C
555KV (6S) 15558 3-Blade Folding (GF Nylon) 6S 65A (25.2V) 61.5A 8,578 6,090 gf 1,549W 3.93 gf/W 68°C

What you still need to complete the build

  • A frame with the matching motor hole pattern
  • ESCs or a 4-in-1 sized for the prop and cell count
  • Props matched to the KV
  • Locking compound for the motor screws

Support and returns

Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 390KV; 435KV; 555KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I choose the correct KV?

Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.

Will this motor fit my frame and propeller?

Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.

How should I size the ESC and battery?

Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.

Are thrust figures valid for every version?

No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.

What should I check before the first run?

Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.

You may also like