BrotherHobby SE 3115 900KV Brushless Motor

BrotherHobby SE 3115 900KV Brushless Motor

900KV
$23.66
Sale price  $23.66 Regular price  $23.66
Skip to product information
BrotherHobby SE 3115 900KV Brushless Motor

BrotherHobby SE 3115 900KV Brushless Motor

$23.66
Sale price  $23.66 Regular price  $23.66
Size900KV

The BrotherHobby SE 3115 900KV is a high-output brushless motor developed for 6S heavy-payload and long-range multirotors swinging 8- to 10-inch propellers. It features Kawasaki/Nippon Steel 1500 stator laminations, N52H neodymium magnets, and pre-soldered 16AWG high-strand silicone wire leads.

Specifications

KV Rating 900KV
Configuration 12N14P
Stator Dimensions 31mm (Diameter) × 15mm (Height)
Motor Dimensions Φ37.5mm × 46.75mm
Motor Weight 125.20g (including 300mm wire)
Lead Wire 16AWG Silicone Wire, 300mm length
Magnets N52H
Phase Resistance 42.0 mΩ
Idle Current (Io @ 10V) 1.68A
Rated Operating Voltage 6S LiPo
Recommended ESC 6S 65A
Recommended Propeller HQ 9×5×3 Glass Fiber Nylon
Max Continuous Current 64.90A
Max Continuous Power 1,596.54W
Insulation Resistance ≥ 0.5 MΩ
Dynamic Balance Standard ≤ 3mg
Base Mounting Pattern 19×19mm (4× M3 on 19mm circle)
Propeller Shaft Thread M5

Before you buy

  • 900KV, 6S, 9-inch props — the manufacturer's own test data is on HQ 9×5×3, with 64.9 A max continuous and ~1597 W. That current figure is what the ESC must survive.
  • Recommended ESC is 6S 65A per motor — a 45 A ESC will not hold this motor at full throttle.
  • 125 g with 300 mm 16AWG wire — heavier than a 2806.5, so plan a 7–9-inch build.
  • Phase resistance 42 mΩ and idle current 1.68 A at 10 V — efficiency data you can use to compare against alternatives.
  • 19 × 19 mm M3 mounting, M5 prop thread.

In the box

  • 1 × BrotherHobby SE 3115 900KV Brushless Motor
  • 4 × M3×8mm Mounting Screws
  • 1 × M5 Flange Propeller Nut

Why this spec

  • 12N14P configuration with 31×15mm stator geometry
  • Kawasaki/Nippon Steel 1500 ultra-thin silicon steel laminations
  • High-temperature N52H neodymium curved magnets
  • Pre-soldered 16AWG flexible silicone wire leads (300mm length)
  • Dynamic balancing rated to ≤ 3mg for vibration-reduced performance
  • Standard 19×19mm M3 mounting pattern with M5 propeller adapter shaft

Measured on manufacturer test platform with HQ 9×5×3 propeller on 6S LiPo. Internal copper temperature measured after 2 minutes at 100% throttle (26°C ambient).

Throttle (%) Voltage (V) Current (A) RPM Thrust (gf) Input Power (W) Efficiency (gf/W)
30% 25.20V 1.80A 4,616 265 gf 45.36W 5.84 gf/W
40% 25.20V 7.50A 7,781 835 gf 189.00W 4.42 gf/W
50% 25.20V 13.20A 9,697 1,321 gf 332.64W 3.97 gf/W
60% 25.10V 23.90A 11,748 1,987 gf 599.89W 3.31 gf/W
70% 25.00V 40.50A 13,645 2,838 gf 1,012.50W 2.80 gf/W
80% 24.80V 52.00A 14,632 3,249 gf 1,289.60W 2.52 gf/W
90% 24.80V 61.70A 15,412 3,656 gf 1,530.16W 2.39 gf/W
100% 24.60V 64.90A 15,569 3,784 gf 1,596.54W 2.37 gf/W

Peak Temperature: 81°C internal copper temperature after 2 minutes at 100% throttle.

What you still need to complete the build

  • A frame with the matching motor hole pattern
  • ESCs or a 4-in-1 sized for the prop and cell count
  • Props matched to the KV
  • Locking compound for the motor screws

Support and returns

Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 900KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I choose the correct KV?

Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.

Will this motor fit my frame and propeller?

Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.

How should I size the ESC and battery?

Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.

Are thrust figures valid for every version?

No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.

What should I check before the first run?

Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.

You may also like