BrotherHobby Tornado T5 3115 Pro Brushless Motor
The BrotherHobby Tornado T5 3115 Pro is a large-stator brushless motor engineered for heavy-lift, cinematic, and long-range multirotor platforms running 8- to 12-inch propellers on 5S–8S power systems. It features a ventilated 7075-T6 aluminum bell, N52H curved neodymium magnets, and a high-strength titanium alloy hollow shaft.
Specifications
| Stator Size | 3115 (31mm diameter × 15mm height) |
| Bell & Base Material | 7075-T6 Aluminum |
| Shaft Material | Titanium Alloy |
| Propeller Shaft Thread | M5 |
| Magnets | N52H Curved Neodymium |
| Bearings | Japanese NMB |
| Motor Dimensions | Φ37.5mm × 49.5mm (25.6mm bell height, 16mm shaft length) |
| Base Mounting Pattern | 19×19mm (4× M3 on 19mm circle) |
| Rated Operating Voltage | 5S–8S LiPo (verify specific KV voltage recommendations) |
| Available KV Options | 400KV, 480KV, 640KV, 900KV, 970KV, 1050KV, 1200KV, 1520KV |
Before you buy
- 3115 with six KV options spanning 400KV to 1520KV — the KV, not the motor, decides what it flies. 400–480KV is 8S heavy-lift, 900–1050KV is 6S on 9–10-inch, 1200KV+ is smaller props.
- 5S–8S rated — confirm the KV you order is matched to your pack, not just the frame.
- 19 × 19 mm M3 base mounting — a 16 × 16 arm needs an adapter plate.
- Titanium shaft with M5 thread — a prop strike can still bend it, and that is not a warranty item.
- Competition-use part: expect tighter tolerances and less crash tolerance than a cruising motor.
In the box
- 1 × BrotherHobby Tornado T5 3115 Pro Brushless Motor
- 4 × M3×8mm Mounting Screws
- 1 × M5 Flanged Propeller Lock Nut
Why this spec
- 7075-T6 aluminum bell and base with wear-resistant hard-anodized finish
- N52H curved neodymium magnets designed for uniform magnetic flux
- Titanium alloy shaft with standard M5 propeller mounting adapter
- Class TU1 high slot-fill enamelled copper windings
- Ultra-thin non-oriented silicon steel stator laminations
- Japanese NMB bearings for smooth rotation under axial and radial loads
- Standard 19x19mm base mounting pattern
Bench tests conducted under controlled laboratory conditions (26°C ambient, 100% throttle for 2 minutes). In-flight results will vary depending on ESC settings, battery health, and atmospheric conditions.
| KV Variant | Tested Propeller | ESC & Voltage | Max Current | Max Thrust | Input Power | Efficiency | Motor Temp (2 min) |
|---|---|---|---|---|---|---|---|
| 480KV | Gemfan 13×8×3 | 6S 50A (25.1V) | 29.0A | 3,413 gf | 728W | 4.69 gf/W | 51°C |
| 640KV | Gemfan 11×7×3 | 6S 50A (24.9V) | 39.0A | 3,699 gf | 971W | 3.81 gf/W | 75°C |
| 900KV | HQ 9×5×3 | 6S 80A (24.9V) | 65.8A | 3,802 gf | 1,638W | 2.32 gf/W | 78°C |
| 970KV | HQ 10×4.5×3 | 6S 80A (25.0V) | 65.4A | 4,431 gf | 1,635W | 2.71 gf/W | 112°C |
| 1050KV | HQ 9×5×3 | 6S 80A (24.9V) | 68.2A | 4,449 gf | 1,698W | 2.62 gf/W | 116°C |
What you still need to complete the build
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Support and returns
Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 400KV; 480KV; 640KV; 900KV; 970KV; 1050KV; 1200KV; 1520KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.