MARK4 V2 Carbon Fiber Long-Range Frame Kit (7" / 8" / 9" / 10" / 13" / Braced)
The MARK4 V2 Carbon Fiber Long-Range Frame Kit enhances the proven MARK4 platform with integrated structural arm braces designed specifically for large-diameter propellers (7", 8", 9", 10", and 13"). By connecting adjacent arms with rigid carbon fiber tension links, the V2 architecture neutralizes lateral flexing and arm harmonic vibration during high-speed cruising and heavy-payload ascents.
Specifications
| Parameter | MARK4 V2-7 / 8 | MARK4 V2-9 / 10 | MARK4 V2-13 |
|---|---|---|---|
| Propeller Clearance | 7-inch / 8-inch | 9-inch / 10-inch | 13-inch |
| Arm Thickness | 5.0mm Carbon Fiber | 5.0mm Carbon Fiber | 5.0mm–6.0mm Carbon Fiber |
| Bracing Structure | Carbon Fiber Cross-Braces | Carbon Fiber Cross-Braces | Carbon Fiber Cross-Braces |
| Stack Mounting | 20×20mm & 30.5×30.5mm | 20×20mm & 30.5×30.5mm | 30.5×30.5mm |
| Motor Mounting | 16×16mm & 19×19mm | 19×19mm | 19×19mm & Multi-Pattern |
Before you buy
- Six sizes from 7 to 13 inch — the 13-inch uses 5.0–6.0 mm arms and 30.5 × 30.5 stack mounting only, while the 7/8-inch also takes 20 × 20.
- Motor mounting differs: 7/8-inch have 16 × 16 and 19 × 19; 9/10-inch are 19 × 19 only.
- Cross-braces are structural — flying without them on a 10-inch+ frame flexes the arms and upsets the gyro.
- 5.0 mm arms up to 10-inch — that is stiff but heavy; expect the frame to dominate dry weight on a 7-inch build.
- The 'Printed copy' variants add printed parts only, no extra carbon.
In the box
- 1 × MARK4 V2 Carbon Fiber Frame Assembly (Selected Size)
- 1 × Structural Arm Cross-Bracing Set
- 1 × Fastener Hardware Pack with Aluminum Standoffs
- 1 × Non-Slip Battery Mat & Strap
- 1 × TPU 3D Printed Component Set (Included with '+Printed copy' variants)
Why this spec
- Structural Inter-Arm Bracing: Eliminates vibration transfer and arm flexing under heavy motor torque and high aerodynamic loads.
- Comprehensive Size Lineup: Available in 7-inch, 8-inch, 9-inch, 10-inch, and 13-inch formats for versatile long-range mission profiles.
- Heavy-Duty 3K Carbon Fiber: High-grade matte carbon fiber plates with chamfered edges for maximum structural integrity.
- Universal Stack Mounting: Double mounting bays support both 20 × 20mm and 30.5 × 30.5mm flight stacks and video transmitters.
- Optional TPU Accessories: Custom 3D-printed camera mounts, GPS mast holders, and arm bumpers available.
What you still need to complete the build
- 4× motors
- A flight stack (30.5×30.5 or 20×20)
- Props matched to the arm length
- VTX, camera and antenna
- Battery
Support and returns
Covered against manufacturing defects for 12 months — delamination, mis-drilled holes and missing hardware. Contact us with the order number and photos of the fault for a replacement part. Crash damage and overtightened bolts are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: MARK4 V2 7-Inch – Frame Only; MARK4 V2 7-Inch + Printed Parts; MARK4 V2 8-Inch – Frame Only; MARK4 V2 8-Inch + Printed Parts; MARK4 V2 9-Inch – Frame Only; MARK4 V2 9-Inch + Printed Parts; MARK4 V2 10-Inch – Frame Only; MARK4 V2 10-Inch + Printed Parts; MARK4 V2 13-Inch – Frame Only; MARK4 V2 13-Inch + Printed Parts. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Is this a complete ready-to-fly drone?
Do not assume a frame listing includes motors, electronics, batteries or radio equipment. Use the selected configuration’s package list to establish what is supplied.
How do I check component fit?
Compare the frame’s exact mounting patterns, camera space, stack height, motor screw pattern and battery clearance with your components. A nominal frame or propeller size alone is not sufficient.
Will every version fit the same propellers?
Verify propeller clearance on the selected frame size and arm configuration, including clearance to the body and wiring. Do not apply one frame size’s clearances to another.
Are replacement arms and printed mounts interchangeable?
Confirm the frame revision, hole spacing and part dimensions. Similar model names do not guarantee that arms, plates or camera mounts interchange.
What should I check during assembly?
Confirm screw lengths and motor-winding clearance, secure wiring away from propellers and isolate exposed electrical contacts from conductive carbon fiber. Inspect the assembly before powering it.