Mark4 Full Carbon Fiber FPV Drone Frame Kit (5" / 6" / 7" / 8" / 5mm Arms)
The Mark4 Full Carbon Fiber FPV Drone Frame Kit is a field-proven, ultra-durable platform engineered for freestyle agility and long-range cinematic cruising. Constructed from high-strength 3K matte carbon fiber plates with heavy-duty 5mm chamfered arms, the Mark4 features a balanced H-frame layout that delivers neutral flight handling and ample internal component volume.
Specifications
| Parameter | Mark4-5 (5") | Mark4-6 (6") | Mark4-7 (7") | Mark4-8 (8") |
|---|---|---|---|---|
| Wheelbase | 225mm | 260mm | 295mm | 330mm |
| Arm Thickness | 5.0mm | 5.0mm | 5.0mm | 5.0mm |
| Top / Bottom Plate | 2.0mm / 2.5mm | 2.0mm / 2.5mm | 2.0mm / 2.5mm | 2.0mm / 2.5mm |
| Stack Mounting | 20×20mm & 30.5×30.5mm | 20×20mm & 30.5×30.5mm | 20×20mm & 30.5×30.5mm | 20×20mm & 30.5×30.5mm |
| Camera Mounting | 19mm Micro / 20mm | 19mm Micro / 20mm | 19mm Micro / 20mm | 19mm Micro / 20mm |
| Motor Mounting | 16 × 16mm (M3) | 16 × 16mm (M3) | 16 × 16mm / 19 × 19mm | 19 × 19mm (M3) |
Before you buy
- Wheelbase and motor pattern change with size: 5-inch is 225 mm with 16 × 16 motor mounts; the 7-inch adds 19 × 19 options; the 8-inch is 330 mm and 19 × 19 only.
- 5.0 mm arms on all sizes, with 2.0 mm top and 2.5 mm bottom plates — a stiff frame that transfers crash energy into the arms.
- Stack mounting is both 20 × 20 and 30.5 × 30.5, so either FC format fits without an adapter.
- Camera mount is 19 mm micro / 20 mm — a full-size 28 mm camera needs a different side plate.
- The 'Printed copy' variants add 3D-printed parts, not extra carbon. Order the plain frame if you print your own.
In the box
- 1 × Mark4 Carbon Fiber Frame Kit (Selected 5", 6", 7", or 8" arms and plates)
- 1 × Anodized Aluminum Standoff & Steel Hardware Assembly Pack
- 1 × Heavy-Duty Non-Slip Battery Strap & Silicone Battery Pad
- 1 × TPU 3D Printed Parts Set (Included only with '+Printed' variants)
Why this spec
- Heavy-Duty 5mm Carbon Fiber Arms: High structural stiffness minimizes arm resonance and withstands severe high-speed crashes.
- Multiple Propeller Sizes: Available in 5-inch (freestyle), 6-inch (hybrid), 7-inch (long-range), and 8-inch (endurance/payload) geometries.
- Dual Stack Mounting Clearance: Supports both 20 × 20mm and 30.5 × 30.5mm flight controller and ESC stacks.
- Optional TPU 3D Printed Accessory Set: Includes camera mount, antenna holder, and protective arm-end skids.
- Digital HD & Analog Compatibility: Generous rear and center clearance accommodates DJI O3 Air Unit, Caddx Vista, Walksnail, and analog VTX systems.
What you still need to complete the build
- 4× motors
- A flight stack (30.5×30.5 or 20×20)
- Props matched to the arm length
- VTX, camera and antenna
- Battery
Support and returns
Covered against manufacturing defects for 12 months — delamination, mis-drilled holes and missing hardware. Contact us with the order number and photos of the fault for a replacement part. Crash damage and overtightened bolts are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: Mark4-5 5-Inch Frame Only; Mark4-5 5-Inch Frame + 3D-Printed Parts; Mark4-6 6-Inch Frame Only; Mark4-6 6-Inch Frame + 3D-Printed Parts; Mark4-7 7-Inch Frame Only; Mark4-7 7-Inch Frame + 3D-Printed Parts; Mark4-8 8-Inch Frame Only; Mark4-8 8-Inch Frame + 3D-Printed Parts. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Is this a complete ready-to-fly drone?
Do not assume a frame listing includes motors, electronics, batteries or radio equipment. Use the selected configuration’s package list to establish what is supplied.
How do I check component fit?
Compare the frame’s exact mounting patterns, camera space, stack height, motor screw pattern and battery clearance with your components. A nominal frame or propeller size alone is not sufficient.
Will every version fit the same propellers?
Verify propeller clearance on the selected frame size and arm configuration, including clearance to the body and wiring. Do not apply one frame size’s clearances to another.
Are replacement arms and printed mounts interchangeable?
Confirm the frame revision, hole spacing and part dimensions. Similar model names do not guarantee that arms, plates or camera mounts interchange.
What should I check during assembly?
Confirm screw lengths and motor-winding clearance, secure wiring away from propellers and isolate exposed electrical contacts from conductive carbon fiber. Inspect the assembly before powering it.