1.7GHz / 1.9GHz FPV Link – 6W VTX or 8CH VRX
1.7G / 1.9G Link — Pick the transmitter or the receiver from the same listing — the two ends are matched, which removes the usual guesswork about which module pairs with which.
Specifications
| Model | 1.7G / 1.9G Link |
| Type | VTX or VRX |
| Frequency band | 1.7 GHz / 1.9 GHz |
| Output power | 6 W (VTX) |
| Channels | 8 (VRX) |
| Connector / input voltage | See the variant you select — this listing covers more than one version |
Before you buy
- Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
- Never power a VTX without an antenna connected — the reflected power damages the output stage.
- Check local RF regulations; high output power is not legal for general use in most countries.
In the box
- 1 × 1.7/1.9 GHz module (6 W VTX or 8CH VRX, as selected)
- 1 × power / video harness
- Antenna not included
Why this spec
- 6 W VTX on 1.7/1.9 GHz is an extreme link budget — it is for fixed installations and long-range fixed-wing, not multirotor.
- The VRX variant is 8 channels — the receiver half of the same band plan, so buy both for a matched pair.
- 1.7/1.9 GHz sits above 1.2 GHz (smaller antennas) and below 5.8 GHz (better penetration) — a deliberate middle ground.
- 6 W needs a real power supply and airflow; underfeeding it causes brownouts on key-up, not just heat.
What you still need to complete the build
- A matching antenna for the band, rated above your output power
- A clean power source sized for the module's current draw
- For VRX units: a display or goggle with analog video input
Support and returns
Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: VTX-F9 6W; VRX-1G7. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.