BrotherHobby Returner 50A 6-12S 32-Bit 4-in-1 ESC (V1)

BrotherHobby Returner 50A 6-12S 32-Bit 4-in-1 ESC (V1)

Returner 6-12S 32Bit 50A(4IN1) ESC V1
$82.09
Sale price  $82.09 Regular price  $82.09
Skip to product information
BrotherHobby Returner 50A 6-12S 32-Bit 4-in-1 ESC (V1)

BrotherHobby Returner 50A 6-12S 32-Bit 4-in-1 ESC (V1)

$82.09
Sale price  $82.09 Regular price  $82.09
ColorReturner 6-12S 32Bit 50A(4IN1) ESC V1

The BrotherHobby Returner 50A V1 is a high-voltage 4-in-1 electronic speed controller tailored for 6S–12S multirotor builds. Equipped with dual CNC aluminum heatsinks, AM32 32-bit firmware, four high-power TVS protection diodes, and an integrated 19V/3A BEC output.

Specifications

Model Name Returner 6-12S 32Bit 50A (4IN1) ESC V1
Firmware AM32 / 2.16
Continuous Current 50A × 4 channels (at up to 50.4V)
Peak Burst Current 65A per channel (10 seconds)
Input Voltage 6S–12S LiPo
Output Voltage 6S–12S LiPo
BEC Output 19V / 3A
TVS Protection 4× High-Power TVS Diodes
External Capacitors 2× 680μF / 63V High-Frequency Low-ESR Capacitors
ESC Protocols PWM, DShot300, DShot600, DShot1200, DShot2400
Current Sensor (CUR) Supported
Telemetry Output (TEL) Supported
Mounting Hole Pattern 30.5 × 30.5 mm
Dimensions 104mm × 64mm (including heatsink)
Total Weight 143g

Before you buy

  • 50 A × 4 at up to 50.4 V — 6S–12S input. Do not feed it 4S and expect the BEC to behave; it is designed for high-voltage packs.
  • AM32 / 2.16 firmware, not BLHeli. Use AM32 configuration software and check that your FC firmware speaks the protocol you select.
  • 19 V / 3 A BEC — high-voltage rail, confirm downstream device ratings.
  • DShot2400 supported, which is unusual at this current class and useful for high loop rates.
  • 143 g with heatsink — heavier than a 5-inch ESC; plan the stack height.

In the box

  • 1 × BrotherHobby Returner 6-12S 50A 4-in-1 ESC V1
  • 5 × M3×8mm Silicone Anti-Vibration Grommets
  • 1 × SH 1.0mm 8-Pin Wiring Harness Cable
  • 1 × XT60 Power Pigtail Cable

Why this spec

  • Wide 6S–12S LiPo input voltage capability (up to 50.4V)
  • Dual-sided CNC aluminum alloy heat sink housings for balanced thermal dissipation
  • Four onboard high-power TVS transient suppression diodes to absorb high-voltage switching spikes
  • Dual 680μF / 63V high-frequency low-ESR filtering capacitors and onboard SMD filter network
  • Running AM32 32-bit firmware (v2.16) configurable via browser and desktop configurator
  • Supports PWM, DShot300, DShot600, DShot1200, and DShot2400 digital protocols
  • Integrated 19V / 3A BEC power output
  • Current sensor and telemetry signal return lines to flight controller
  • Standard 30.5×30.5mm mounting pattern with vibration-damping silicone grommets
  • GND: Ground (Power Negative)
  • VCC: Battery voltage output to Flight Controller ADC
  • M1 – M4: Throttle signal inputs for Channels 1 through 4
  • CUR: Current sensing telemetry output
  • TEL: Bidirectional telemetry output port

What you still need to complete the build

  • A flight controller with the matching harness
  • Motors within the ESC current rating
  • A capacitor across the battery pads

Support and returns

Covered against manufacturing defects for 12 months. Contact us with your order number and photos or a short video of the fault and we will repair or replace the item. Crash damage, water ingress and modification are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: Returner 6-12S 32Bit 50A(4IN1) ESC V1. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

Does every option include both a flight controller and an ESC?

No such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.

How do I check the supported battery voltage?

Use the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.

Are matching-looking connectors plug-and-play?

Compare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.

Which firmware target should I use?

Use the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.

Is the current rating a guarantee for my installation?

No. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.

How should I perform initial setup?

Remove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.

You may also like