RUSH MAX SOLO 5.8GHz 2.5W High-Power FPV Video Transmitter (CNC Heatsink Fan)
The RUSH MAX SOLO 5.8GHz 2.5W (2500mW) Video Transmitter is an ultra-high-power analog FPV transmission system engineered for extreme long-range flights, fixed-wing cruising, and signal penetration through dense obstacles. Encased in a precision CNC-machined aluminum alloy heatsink housing with an integrated active cooling fan, the MAX SOLO ensures sustained RF output without thermal throttling.
Specifications
| Parameter | Specification |
|---|---|
| Model | RUSHFPV MAX SOLO 2.5W VTX |
| Frequency / Channels | 5.8GHz / 48 Channels (Standard Bands + RaceBand) |
| Output Power Levels | PIT / 25mW / 400mW / 800mW / 1600mW / 2500mW (MAX) |
| Input Voltage | 7V – 36V DC (2–8S LiPo) |
| Output Voltage | 5V DC (500mA max for camera) |
| Antenna Connector | MMCX |
| Audio | Integrated AGC Microphone |
| Protocol | SmartAudio Telemetry / Button Control |
Before you buy
- 2.5 W is illegal in most countries without a licence. Check local rules before transmitting; 25 mW is the legal ceiling in the EU.
- Never power it without an antenna. The MMCX connector must have a load — reflected power destroys the PA in seconds.
- 7–36 V input (2–8S) means it can run straight off the pack, which also means pack voltage spikes reach it. Fit a capacitor if your leads are long.
- Six power levels: PIT / 25 / 400 / 800 / 1600 / 2500 mW — start low and step up; you rarely need 2.5 W for a normal link.
- CNC heatsink with fan — the fan is not optional at high power; airflow is what keeps the PA alive.
In the box
- 1 × RUSH MAX SOLO 5.8GHz 2.5W Video Transmitter
- 1 × MMCX to SMA Adapter Pigtail Cable
- 1 × SH1.0 6-Pin Power and Video Connection Cable
- 1 × Mounting Hardware Pack
Why this spec
- 2.5W (2500mW) Maximum RF Output: Delivers massive signal penetration and ultra-long range video transmission for FPV drones and fixed wings.
- CNC Aluminum Armor with Active Fan: Heavy-duty aluminum enclosure with integrated micro brushless cooling fan maintains low operational temperatures on the bench and in flight.
- Wide 7V–36V (2–8S LiPo) Input: Connects directly to high-voltage flight batteries without external step-down voltage regulators.
- Onboard Microphone & Clean 5V Output: Features built-in AGC microphone and clean 5V/500mA filtered DC output for FPV camera power.
- SmartAudio & Button Control: Change channels, bands, and power levels via Betaflight OSD SmartAudio telemetry or onboard tactile buttons.
What you still need to complete the build
- Check the specification table for the parts this item pairs with
Support and returns
Covered against manufacturing defects for 12 months. If a unit arrives dead, loses its video lock or overheats at rated power, contact us with the order number and a short clip. Running it above the rated voltage, transmitting without an antenna, or crash damage are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: solo max 2.5w VTX. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
What information is needed to confirm a custom part?
Provide a dimensioned drawing or CAD file, material requirements, thickness or tube dimensions, hole locations, tolerances, finish and quantity. Confirm the final specification before ordering.
Are the photographed dimensions the final production dimensions?
Use the agreed drawing and the selected specification, not proportions measured from a photograph. Confirm critical clearances and hole spacing before production.
Does weave or appearance establish structural performance?
No. Appearance alone does not establish laminate construction, load capacity or suitability for a particular aircraft. Confirm engineering requirements for the intended application.
Are hardware and electronics included?
Only items explicitly listed for the selected configuration or agreed quotation should be treated as included. Confirm fasteners, inserts and any assembly work separately.
Can this part be installed without checking fit?
Compare the final dimensions and mounting interfaces with the intended assembly. Electrically isolate carbon-fiber parts from exposed conductors and inspect machined edges before installation.